close
Forgotten your password?

Customer Login:


Uk's Leading Retailer for Quadcopters, DJI Drones, FPV Equipment and CAA Approved Drone Training.

Technical Support and Advice  9.00am - 4.15pm 01257 450555
Stock and Order Enquiries 9.30am - 4.30pm 01257 367273
£196.00
  • Description
  • Reviews
DJI E600 TUNED PROPULSION SYSTEM 4 AXIS VERSION.. NEW V2 Esc's

DJI E600 Tuned Propulsion System 4 Axis Combo Version

Package includes

  • 4 X E600 20A ESC (new v2 version)
  • 4 X 3508/415KV Motor
  • 4 X CCW 12 X 4.2 Prop
  • 4 X CW 12 X 4.2 Prop
  • 1 X Accessory Box Containing Bolts, Heat Shrink & Distribution Board

The E series tuned propulsion system is the first power solution of its kind for the multirotor industry. It brings greater aerodynamic efficiency and higher thrust-weight ratio, while increasing reliability, stability and agility.

20A ESC

This new and improved ESC along with new highly efficient and quick response algorithms, combine to provide drastic optimisation of both motor and rotor parameters, all come together to enhance this propulsion system to utilise an agile thrust which gives the aircraft extra manoeuvrability and stability in wind and during descending. Also feature an electromagnetic compatibility design with a coaxial-cable, which work together to provide a calm electromagnetic environment for the airborne sensors. Furthermore the 20A ESC together with DJI 3508 motor brings 6S high voltage power system to middle-sized multi-rotors, enable them a much higher electrical efficiency and extended durability.

3508 Motor

From magnets to steel, from copper wire to bearing DJI only use the best materials to make the best products. Improved mass production techniques, along with scientific quality control systems, lowers costs and ensures that DJI products are more accessible to users. The new self-tightening mechanism dramatically reduces any chance of loosening rotor or mistakenly installed rotors. Tool-free mounting and dismounting makes storage and transportation much easier.

12 X 4.2 Propeller 

With the state of the art aerodynamic efficiency and only nearly half of the inertia product of the normal 12*3.8″ rotor, the 12*4.2″ rotor offers you an outstanding flight experience. The rotors are carefully balanced dynamically, you will never be bothered by jello effect from your airborne rolling shutter camera. The low inertial design enables your flight controller to use a much higher gain value to achieve a higher stability and maneuverability all at once.

 

Specs of the E600 Motors and Escs

Recommended Load

600 g/axis

Maximum Thrust

1600 g/axis

Working Temperature

-5 °C ~ 40 °C

Recommended Battery

6S LiPo

Units Per Package

Quad or Hexa

Current

20 A OPTO

Signal Frequency

30 Hz~450 Hz

Voltage

14.8 V~25.2 V

Battery

4S~6S LiPo

Stator Size

35×8 mm

KV

415 rpm/V

Weight

90 g

Diameter /Thread Pitch

31×11 cm 12×4.2 inch

Customer Reviews

Write an online review and share your thoughts with other shoppers!

Be the first to review this product