Armattan Chameleon Frame Kit Orange 5" Inc PDB

IN-STOCK
333 Reward Points
SKU:
Brand: Armattan

Quantity

ADD TO WISHLIST

Sorry this item is out of stock, to put it on back order please place it in your basket and complete the purchase. Alternatively, fill in the form below to be notified when stock is available.

Armattan Chameleon Frame Kit inc PDB Latest Version 5" with Orange or Silver Alloy as used by Tom Smith FPV UK Stock .

Our stock is always fresh from Armattan as we place orders weekly due to high sales volumes. You can always be assured of the latest FPV Freestyle frame when purchasing from us. This is the version with the PDB Board. We do a version without the PDB also.
The Armattan Chameleon is a lovingly calculated and sleek yet lightweight, dedicated freestyle racing frame developed and produced by Armattan Quads. Being Armattans flagship model, every included feature was carefully considered and artfully incorporated into the final revision. While many of those features are fairly traditional, there are a few innovations that would benefit from a closer examination. The first is the "low-rider" style top-plate. This lowered mount gets the battery closer to the center of gravity for this machine. This means your rolls and flips will be snappier, and less likely to over-rotate. An unexpected (but very welcome) feature of the recessed top-plate is that the camera cage will be more likely to protect your battery in the event of an upside-down impact. Your wallet and batteries will both thank you for that one.

Speaking of the camera cage, the 4mm thick, 6061 aluminum structure on the front of this frame corners the market for providing the most protection and versatility in mounting your cameras. Not only will your frame fully protect your FPV camera above 25 degrees but it allows for near unlimited vertical play. If you want to fly backwards like Suki or take things at a more relaxed pace, this will let you achieve the angle you need. Plus, Armattan's thumb-screw system makes it easy to switch between the two on the fly (pun totally intended). In addition, the HD camera mounting plate allows you to adjust the angle of your recording device from 30 up to 60 degrees. No more will you have to cut and mount a wedge of foam in order to get the ideal, "single"recording angle (as if that exists). You can fine tune larger or smaller as desired with your standard M3 driver. What could be simpler than that?

The third and final Chameleon innovation (that we will explore here) is the VTX mount on the rear of the bus. While it is outwardly a solid point to mount your SMA adapter, it has a couple secret functions as well. Cut into the carbon fiber top-plate are a set of holes that line up above where you will mount your VTX. These were carefully measured to align with the screens, dip-switches, and buttons of many popular transmitters on the market today (Foxeer, TBS, etc). We think changing your channel at the field should be as quick and easy as changing your camera angle. This helps us achieve that goal. The other secret is the little bar next to the SMA hole. This is a diversity receiver mount for your RX of choice. If you zip two ties to that spar you can angle them for horizontal (out the back) and vertical (out the top) polarization. This should help prevent against an unforgiving fail-safe at the start of your greatest dive yet.
 

Chameleon Warranty

In the unfortunate instance that you meet the ground at a high rate of speed (and damage does occur), Armattan is offering a full bumper-to-bumper warranty for the Chameleon frame. Included in the list price is a warranty that covers all of the pieces (both Carbon Fiber AND Aluminum) for that added peace of mind.

Included

Frame
1x 4mm Main Plate
1x 2mm Lipo Top Plate
1x Aluminum VTX mount
2x Rubber SMA O-Rings
16x M3 6mm motor bolts
4x M3 nylon 12mm bolts
4x M3 nylon 6mm male/female standoffs
8x M3 nylon nuts
2x M3 6mm cup head iron bolts
4x M2 5mm cup head bolts
2x M3 7mm countersunk bolts

Camera Cage

1x HD Cam Top Plate
2x 1.5mm Cam Braces
2x 4mm Aluminum Cam Protector
2x 4mm Aluminum HD Cam Lever
2x rubber dimes
8x M2 5mm cuphead bolts
2x M2 5mm bolts
2x M2 washers
2x M3 sunknuts
2x M3 aluminum thumbscrew
2x M3 8mm iron bolts
4x M2 10mm cuphead bolts
4x M3 10mm iron bolts

Stack Hardware
8x M3 rubber FC O-rings
1x Mini PDB V2 or V3
1x XT60 & connector saver
2x 50mm power wire
2x heatshrink (for power wire)

Foam and Rubber Protection
4x Foam Landing Pads
1x Lipo Top Plate Foam Pad
1x HD Cam Foam Pad

Quadcopters Are official Armattan Dealers and have the latest revision of the freestyle chameleon frames in stock all the time. Also available in 6 inch for the long range fpv pilots.

warren
The best freestyle frame there is period. Lifetime warranty and best quality carbon and low profile design with perfect GoPro mount angle makes this a winner in my book.
warren
Armattan Chameleon Frame Kit 5" The best freestyle frame there is period. Lifetime warranty and best quality carbon and low profile design with perfect GoPro mount angle makes this a winner in my book.
Oliver
A well laid out frame with the best quality carbon fibre backed with a lifetime warranty, The weight is good considering the quality and easy to fit a GoPro session . Highly recommend this frame and the service from QC.
Adi
Great freestyle frame and high quality parts / carbon. I chose the Chameleon for the lifetime warranty and although not needed to claim yet the assurance its there seems to make me fly better :) Kit went together with no issues or fuss and fast shipping too.

Write your own review

The item has been added to your basket

Continue Shopping
Proceed To Checkout