Bannilite Frame 5” FPV Racing

333 Reward Points
Brand: Bannilite



Sorry this item is out of stock, to put it on back order please place it in your basket and complete the purchase. Alternatively, fill in the form below to be notified when stock is available.

The Bannilite Fpv Racing Frame has been designed by Luke Bannister. IN Stock

Working alongside Luke Bannister on every aspect of this frame from the ground up to produce the ultimate lightweight racing frame thats designed to win and offers strength and camera protection. BanniUK. Luke wanted particular requirements and tweaks and they have all been implemented in this ultimate lightweight racing frame. Made with high quality yet lightweight components and carbon.
Falcon Multirotors and Banni have worked in collaboration to create the ultimate racing frame.

Luke flew the Bannilite at UK Nationals taking 1st place and he will be using this as his race rig for the new 2018 season.

Camera Protection - The Bannilite has you covered.

The main thing to get hit in a crash is the camera and if that happens its usually race over the bannilite frame protects the camera area very well. Tested with a front on direct hit to a metal gate directly in the middle of the frame resulted in impact only against the horizontal standoff or 2.5mm thick camera protection plates. Swapping cameras mid race should now be a thing of the past.

Support Luke Bannisters Favourite set up.

Gemfan 5051 props, TMotor 2207+ motors, the Hobbywing XRotor Micro 4in1 stack, Runcam Swift Micro, TBS Unify, and the TBS Micro Crossfire reciever all mount inside the frame. 

Now you can fly the exact same set up as the world famous drone racer or customise to your own preferred setup. 

Quick Arm Change Design.

With the Bannilite frame if you do break one of the arms which are 5mm so should be minimal, it is a matter of only removing 2 securing screws and swapping over, all without disturbing the 4 in 1 stack and electronics.


Frame Size220mm
Supported Prop size5"
Arm Dimensions5mm thick, 9.75mm wide
Stack height30mm or 20mm

Contents of the BanniLite Frame Kit.
1 x Complete Frame Kit
1 x Spare 5" Arm 5mm
2 x Spare Cam Struts Vertical
1 x Spare Cam brace horizontal
Few pieces of additional hardware also included.

Write your own review


The item has been added to your basket

Continue Shopping
Proceed To Checkout