Betafpv BT2.0 1s Lipo Multi Charging Board

IN-STOCK
333 Reward Points
SKU:
Brand: BetaFPV

Quantity

ADD TO WISHLIST
Found it cheaper? Click here

Sorry this item is out of stock, please complete in the form below to be notified when stock is available.

QuadCopters Price Match

Where you've seen it cheaper (UK Stores Only)

Charge 6 x 1S Lipo BT2.0 LiHV batteries at once with this portable charger, Comes with XT60 Connector for the power input.

Compact, versatile and powerful, the battery chargers board is among the most popular pilots' common tools. This charger board is customized for BT2.0 connector battery, while it is safely and easily charging packs.

Bullet Point

  • Allow charging 6pcs BT2.0 Connector batteries at the same time, Individual charging per ports, not parallel
  • You could also use XT60 adapter or 3s/4s battery(XT60 Input) as supply power so you can continuously charge
  • Turns itself off when supply battery reaches safe low-voltage. 2 channels BEC for supply current
  • LED lights indicate when each battery is done charging

    bt2-0-charger.jpg
    Note: If you plug battery with XT60 connector, please switch to corresponding Input voltage button. 3S battery-- 3S button, 4S battery-- 4S button. If you do not switch match button, it will unable to be charged. The power adapter can choose any Input voltage button.

    connector.jpg
    Charger Board Specification
    • Weight: 36.86g
    • Dimensions: 75x42x22mm
    • Input: 3s - 4s Selectable
    • Cutoff Voltage: 10.8v (3s), 14.4v (4s) 
    • Output: Fixed at approx 400 milliamps
    • 4.20v cell charging cutoff for Lipo battery (+- 0.5% margin of error)
    • 4.35v cell charging cutoff for HV Lipo battery (+- 0.5% margin of error)
    • Optional AC Wall Adapter

Write your own review

 

OK

The item has been added to your basket

Continue Shopping
Proceed To Checkout