BetaFPV TWIG XL 3inch BNF Mini Quad Frsky

333 Reward Points
Brand: BetaFPV


Found it cheaper? Click here

Sorry this item is out of stock, please complete in the form below to be notified when stock is available.

QuadCopters Price Match

Where you've seen it cheaper (UK Stores Only)

BetaFPV TWIG XL 3inch BNF Mini Quad with Frsky Receiver.

This TWIG XL X version is definitely one of the most popular 3 "frames at the moment. The performance / weight ratio of this 3" FPV Racer is second to none! With the Caddx Ratel camera, the new 1404 3800KV brushless motors and the 12A Toothpick F4 2-4S AIO flight controller, it is flown with 4S Lipo battery with 450 mAh and offers you a super efficient flight experience. In addition, BetaFPV uses a super-stable injection molding canopy, which protects your camera well even in the event of several accidents.

BetaFPV TWIG XL 3inch BNF Mini Quad


  • Weight: 104.2g (without battery)
  • FC&ESC:12A Toothpick F4 2-4S AIO FC
  • Motors: 1404 3800KV Brushless Motors
  • Props: HQ 3016 3-Blade Props
  • Camera: Caddx Ratel Camera
  • VTX: A01 25-200mW 5.8G VTX
  • Frame: TWIG XL Frame
  • Canopy: Injection Molded Canopy for TWIG
  • Receiver: Frsky XM 
  • Battery: 450mAh 4S battery(NOT included)
  • Flight time: 3:00-5:00mins

twig camera angle

Flight Controller

Toothpick F4 2-4S 12A AIO FC- Integrated with a Betaflight MATEKF411RX processor FC, Betaflight OSD and 2-4S 12A ESC, support 4S battery for fast-flying experience.

betafpv teig xl 3 flight controller

Camera & VTX

The Caddx Ratel is a great camera choice for both night flight as well as during the day! Equipped with a high quality 1/1.18" HDR sensor, it provides up to 0.0001 Sensitivity of lux. It is very versatile in that you can switch between PAL and NTSC video and also between 4:3 and 16:9 video formats. Latency is super low at only 8ms.

ratel camera specs

Specification of Camera

  • Image Sensor: 1/1.8" Inch starlight HDR sensor       
  • Horizontal Resolution: 1200TVL
  • FOV: 180 Degree
  • Min. Latency: 8ms
  • TV System: NTSC & PAL (changeable)
  • Image: 16:9 & 4:3 (changeable)
  • WDR: Super WDR (HDR)
  • Min. Illumination: Starlight 
  • Synchronization: Internal 
  • Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
  • S/N Ratio:  >60dB (AGC OFF)
  • Video Output: CVBS
  • Camera OSD: Separate OSD
  • DNR: 3-DNR

Specification of VTX 

A01 VTX board is lighter and perfectly suitable for canopy with switchable output power between 25mW and 200mW. SmartAudio is available for VTX remote control in default.

  • Output power: 25mW and 200mW (Adjustable)
  • Smart Audio function is included for radio control
  • Frequency: 5.8GHz 6 bands 37 channels

TWIG Frame

TWIG XL frames are premium 3mm thick, high-grade T700 carbon cut along the weave and chamfered on both sides interior and exterior edges at .7mm.  All the frames are approximately 140mm motor post to motor post and swing up to 3” props. The frames accommodate motor mounting for 4-hole 9x9 or 12x12 motor mounts. 

Injection Molded Canopy

The micro canopy specially designed for 19-20mm camera, which adopts injection molded process and PE material, much durable than the original canopy.


  • 1 * TWIG XL 3'' FPV Quad
  • 1 * HQ 3016 3-Blade Props (4pcs)
  • 1 * Set of M2*7 screws

*Battery is NOT included. 


The item has been added to your basket

Continue Shopping
Proceed To Checkout