Beta75 Pro 2 Micro Racing Drone 2S

IN-STOCK
333 Reward Points
SKU:
Brand: BetaFPV

Quantity

ADD TO WISHLIST

Sorry this item is out of stock, please complete in the form below to be notified when stock is available.

Beta75 Pro 2 2S Micro Racing FPV Drone by BetaFPV.
Frsky Receiver D8 Mode . 

The Beta75 Pro 2 is a micro whoop drone which is very light but nevertheless very fast. With the flight controller AIO F4 2S and 0802 brushless motors, and only 28 g without battery. BETAFPV is still trying to offer more choice to all FPV pilots The Pro Series is the product line with integrated brushless UAVs that are lighter, faster and more efficient. This is a lighter version to the 75X and is said to be a trashcan beater.
We also recommend changing the pigtail to the XT30 and then you can use the Tattu 450 2s lipos with ease.

Key Points 

  • The Beta75 Pro 2 opens new perspectives for whoop 2S drones. Compared to Beta75X, it weighs 14g less. You can fly in real mode with a 2S battery, like a faster Tiny Whoop drone, while remaining small enough, safe and quiet enough to fly anywhere.
  • Thanks to the FC high-performance cards with STM32F411 processor and the betaflight_matekf411rx_4.0.0 (development version) version, the Beta75 Pro 2 drone can be piloted like a racing pro.
  • The durable and lightweight frame is customized for the Beta75 Pro 2. It is 2g lighter than the Beta75X, but has the same battery slot compatible with the 2S.
  • Whole drone seamless or DIY needed. The lightest 0802 12000KV custom motors with cable connectors. Just plug in and play.
  • 2 high speed 300mAh HV 1S batteries are recommended by default. But the pilot could also use his 2S battery with a replacement power cable. Optional and affordable.
  • The wash-out problem does not exist in Beta75 Pro 2 drones.


Specs of the Beta75 Pro 2s

  • Weight: 28g (without battery)
  • Motors: 0802 12000KV with connector
  • Protocol D16 FCC / D8 EU
  • Frame: Beta75 Pro 2
  • Propellers: Quadripal 40mm, 1.0mm shaft hole
  • Camera: 35 degree AIO camera (default)
  • Receiver option: Frsky
  • Battery: 300mah 1s HV Batteries 2pcs

Comparison between Beta75X and Beta75 Pro 2:
key differences between beta75x and Beta75 Pro 2s

FC & ESC Features

FC 2S AIO F4 Card

  • Six axes: MPU6000
  • Size: 26mm x 26mm, mounting pattern
  • Firmware version: betaflight_matekf411rx_4.0.0 (development version)
  • OSD: Built-in OSD BetaFlight (STM32 controls the OSD chip on SPI in DMA mode)
  • The Smart Audio port is available for VTX radio control
  • Built-in 1-2S controller with 5A DC current and 6A peak current
  • Programmable BLHeliSuite support
  • Factory firmware: S_H_50_REV16_7.HEX


AIO VTX camera

On the Beta75 Pro 2, this is the custom AIO VTX camera lighter, with only 2.9 g.

  • Output power: 25mW
  • The Smart Audio function is included for radio control
  • Antenna: Dipole ANT
  • Frequency: 5.8 GHz 6 bands 48 channels, with Raceband: 5362 ~ 5945MHz
  • TV system: PAL
  • Field of view: 100-120 degrees with 1/4 lens

Contents

  • 1 x Beta75 Pro 2 BNF 2S
  • 2 x 300mAh 1S HV batteries
  • 1 x spare camera holder with 25 degree tilt


PLEASE NOTE YOU WILL NEED TO BIND IN D8 MODE 
5. If you are using EU-LBT firmware radio controller, you might find that you can't bind successfully to this SPI Frsky receiver. Here are the solutions betafpv provide for you. 

Steve
OMG the beta 75 pro 2 is a little beast, its rock solid and extremely fast even outdoors its capable of loops rolls and even dives which previously Ive not been able to do on my official Tiny whoop drone. The range and camera quality Is also surprising good for such a little drone.

Write your own review

 

The item has been added to your basket

Continue Shopping
Proceed To Checkout