Cobra CP30A BLheli_S ESC DShot 600 A very small 6.4g but high performance Esc capable of 35a bursts
- Max Continuous Current: 30 Amps
- Burst Current rating (10s): 35 Amps
- ESC Microprocessor: EFM8BB21F16 50MHz
- Operating Voltage Range: 6 to 16 Volts
- Number of Li-Po cells: 2 to 4 cells
- BEC Output: None (OPTO)
- ESC Size (mm): 28x 13
- Weight (With Lead Wires): 6.4 grams
- Programming: Yes
- Supports: OneShot125 / OneShot42 / MultiShot / DShot 600
At 6.4g the New 30a Cobra ESC is able to deliver incredible AC power to your brushless motors. These Electronic Speed Controllers from Cobra are suitable for mini-quads 180mm-250mm size and are a perfect combination when paired with the Cobra 2207 – 2450kv Motors.
Capable of running DSHOT, the CP30A become astonishingly fast at responding to digital inputs from the flight controller.
BLHeli_S is designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth throttle response and silent operation. The small size combined with lightweight makes for easy installation.
The code supports regular 1-2ms pulse width input, as well as;
The input signal is automatically detected by the ESC upon power up. ·All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling. The code supports features to prevent sync loss. There are tuneable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments. The code also supports beacon functionality where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts.
- 1x 30A ESC – CP30A Electronic Speed Controller