DJI Spark Drone

IN-STOCK
333 Reward Points
SKU:
Brand: DJI Innovations

Quantity

ADD TO WISHLIST

Sorry this item is out of stock, to put it on back order please place it in your basket and complete the purchase. Alternatively, fill in the form below to be notified when stock is available.

DJI Spark Smart and Compact Drone the smallest and smartest in its class UK Store.

In stock now from our UK Store , DJI Specialists.

DJI Spark is a mini drone that features all of DJI's signature technologies, allowing you to seize the moment whenever you feel inspired.

DJI Spark mini drone UK Stock - Quadcopters.co.ukDJI Spark Easy Controls uk dji store - Quadcopters.co.uk

dji-spark-selfie-drone-uk-store.jpg

DJI Spark Intelligent Flight Modes - Quadcopters UK Store

DJI Spark Quick Shot and Tapfly UKDJI Spark Follow me active track

Spark from DJI Selfie Mode and Palm Control - Quadcopters.co.ukDJI Spark Camera Specs UK DJI StoreDJI Spark Smooth Gimbal Stabilization Crisp VideoPowerful Lens 25mm DJI Spark UK Stock

dji spark drone large sensor

Multiple Shooting modes with the DJI Spark from our UK Store

Flight Performance on the DJI Spark 50kph

Long range with HD Video Link DJI Spark UK store

DJI Spark Flight Safety with Return to home - Quadcopters.co.uk


Write your own review

DJI Spark Questions and Answers.

What are the differences between Spark and Mavic?

The Spark is smaller and lighter than the Mavic Pro but it does also support all of the Mavic Pro’s Intelligent flight modes. The DJI Spark introduces new features like 'QuickShot' and advanced gesture controls like 'PalmControl'. 

How do I control the DJI Spark?

You can control the DJI Spark with either your mobile device or tablet by simply downloading the 'DJI GO 4' app OR by using the specially designed remote controller.

How do I activate the Spark?

There are two ways to activate Spark:
Either connect Spark with your mobile device and follow the instructions in DJI GO 4 to complete activation.
OR Tap the top right icon in DJI GO 4’s main page, choose 'Scan QR Code', and use your mobile device’s camera to scan the QR code in the Spark's battery compartment. Follow instructions given in the app to complete the activation process. 

What are the recommended Micro SD cards for Spark?

Sandisk 16 GB UHS-1 Micro SDHC
Sandisk 32 GB UHS-1 Micro SDHC
Sandisk 64 GB UHS-1 Micro SDXC
Kingston 16 GB UHS-1 Micro SDHC
Kingston 32 GB UHS-1 Micro SDHC
Kingston 64 GB UHS-1 Micro SDXC
Samsung 16GB UHS-I Micro SDHC
Samsung 32GB UHS-I Micro SDHC
Samsung 64GB UHS-I Micro SDXC

Is the Spark waterproof?

No. It is recommended to avoid flying Spark in rain, fog, snow, or wet weather. Also avoid landing in or taking off from puddles, as the chassis is close to the ground.

CAMERA

What new functions does Spark’s camera have?

Spark supports ShallowFocus and Pano modes, which includes Horizontal and Vertical modes.

What is ShallowFocus?

ShallowFocus creates photos which reflect that of a high quality DSLR with a shallow depth of field with its 3D mapping technology. 

Which Pano modes are available?

Vertical Mode: The camera will capture three photos vertically, then combine them to make a vertical panorama.
Horizontal Mode: The camera will take 9 photos from various angles, vertically and horizontally, then stitch them together to make a horizontal panorama.

Can I capture photos or record video without a Micro SD card?

Yes. Alternatively, the aircraft will store photos and videos on your mobile device. In this instance, the images captured are actually from the live stream video sent to your device with a photo resolution of 1024×768 and video resolution of 1280×720.

Vision

What is the maximum distance and speed at which Spark can sense obstacles?

Spark will automatically avoid obstacles up to 16 ft (5 m) in front of it. The maximum speed that the DJI Spark is capable of sensing obstacles is 3 m/s.

What new Intelligent Flight Modes does Spark include?

Spark is the first DJI drone to feature new TapFly submodes, Coordinate and Direction.
In QuickShot mode, Spark takes professional shots for you with Rocket, Dronie, Circle, and Helix.
The Spark’s 'Gesture Mode' also features a range of gesture recognition commands, including PalmControl, Follow, Beckon, and PalmLand.

Remote Controller

What mobile device sizes fit inside Spark’s remote controller?

Spark’s remote controller fits mobile devices 6.5‑8.5 mm thick and up to 160 mm in length. Mobile devices larger than will not fit the device holder. 

How do I update the remote controller firmware?

The firmware can be updated by using the DJI GO 4 app.

How long does it take to fully charge the remote controller? How long is the battery life?

It takes up to 2 hours to full charge the controller and this will provide 2.5 hours of use. 

How do I link Spark to the remote controller?

Press the Pause, Fn, and C1 buttons at the same time. Once the controller starts beeping, release these buttons. With Spark powered on, press and hold the battery power button. When you hear Spark beep, release this button. Linking is now complete. 

What Wi-Fi frequencies does the remote controller support?

The remote controller supports 2.4 GHz and 5.8 GHz dual‑band Wi‑Fi frequencies. 

What are the dimensions of the remote controller?

The remote controller is approximately 15 cm long, 8 cm high, and 6 cm thick. 

Propulsion

Do I have to remove the propellers when storing or transporting Spark?

No. Just simply fold the propellers.

What happens if the propellers are not fully unfolded before flight? 

Once the rotors start spinning, centrifugal force will automatically unfold the propellers into the correct position. 

Spark’s motors are not all on the same plane. Will this affect flight performance?

No. Each motor sits at a 5° angle for optimal flight performance. 

What wind speeds can Spark resist?

Spark can withstand wind speeds between 13‑18 mph (20‑28 kph).

Video Transmission

What’s the resolution of Spark’s video transmission?

720p 30 fps.

What’s the latency of Spark’s video transmission?

The video transmission latency to your mobile device is about 200 ms. It is subject to the performance of your mobile device and signal interference. 

What is Spark’s effective transmission range?

When connected to a remote controller:
2.4 GHz
FCC: 1.2 mi (2 km); CE: 0.3 mi (500 m); SRRC: 0.3 mi (500 m) (unobstructed and free of interference)
5.8 GHz
FCC: 1.2 mi (2 km); CE: 0.18 mi (300 m); SRRC: 0.7 mi (1.2 km) (unobstructed and free of interference)
When connected directly to a mobile device:
A max height of 50 m and distance of 100 m. 

Can frequency bands be manually adjusted during video transmission?

Yes. Users can manually choose between 2.4 GHz and 5.8 GHz or let DJI GO 4 choose a frequency band automatically. 

Where can I check the aircraft Wi-Fi’s username and password?

There are three places where you can check this information: a. The battery compartment on the aircraft (only the default Wi-Fi username and password can be found here);
b. The Settings option in DJI Assistant 2 or DJI GO 4;
c. The foam outer box (only the default Wi-Fi username and password can be found here). 

How do I reset or modify Spark’s Wi-Fi username and password?

To reset, hold the power button down for 9 seconds until you hear the aircraft beep three times.

 To modify, connect your mobile device to Spark, enter the DJI GO 4 app, and modify the Wi-Fi username and password in the Connection Help Menu.

(Note: If Spark is connected with DJI Assistant 2 on a computer, restart the aircraft before resetting the Wi-Fi username and password.)


My mobile device does not detect Spark’s Wi-Fi when I turn it on. What should I do?

This may be because Spark was previously connected to the remote controller. To prompt detection, power on the aircraft, then press down on the power button for six seconds until you hear the aircraft beep twice. This indicates that Spark’s Wi-Fi is now detectable on your mobile device. 

Battery

How do I charge Spark? 

Use the included USB cable to charge Spark. During charging, do not remove the battery from the aircraft.
Use the Charging Hub to charge three batteries simultaneously. If using the Charging Hub, you will need to remove the batteries from the aircraft and place them in the Charging Hub.

My newly purchased battery is not responding when I press the power button. What should I do? 

New batteries are shipped in Hibernation Mode. In order to activate your newly purchased battery, charge it fully. 

How long does it take to fully charge a battery?

When using a standard USB charger, it takes 80 minutes to fully charge a battery.
When using a Charging Hub, it takes 52 minutes to fully charge one battery, 55 minutes when charging two batteries and 85.2 minutes when charging three batteries at the same time.

How often should I fully charge my Spark batteries?

It is recommended to fully charge Spark batteries at least once every three months. 

When does a battery enter Hibernation Mode?

When a battery is less than 10% charged, it will enter Hibernation Mode after approximately six hours of nonuse.
When a battery is completely drained, it will enter Hibernation Mode within 10 minutes of turning off. 

What functions can the power button perform?

a. Turning the battery on and off: Press the power button once, and then press again and hold it down for at least two seconds to turn the battery on or off.
b. Checking the current battery level: Press the power button once to check the current battery level.
c. Linking Spark and the remote controller: Hold down on Spark’s power button for three seconds, and release on hearing a beep. Spark’s front indicators will start to flash in red, signifying Spark and the remote controller have been linked.
d. Delinking Spark and the remote controller: In order to use your mobile device to control Spark, you will need to delink the aircraft and remote controller. Power on Spark, and hold down on Spark’s power button for six seconds until you hear it beep twice. Now Spark and the remote controller have successfully been delinked and you can search for Spark’s Wi-Fi on your mobile device.
e. Resetting Spark’s Wi-Fi username and password: Hold down on the power button for nine seconds, and release after hearing it beep three times. Your Wi-Fi settings will be reset to the factory default.  
f. PalmLaunch: Power on Spark and place it on your palm with the camera facing you. Make sure your fingers are lower than Spark’s arms. Press the power button twice when the flight indicators start to flash green. The indicators will change to a slowly flashing yellow, and FaceAware will begin to recognize your face. The front indicators will turn to green if detection is successful, and PalmLaunch will be activated. If not, the indicators will flash red. 

What can I do with the two USB ports on the Charging Hub?

You can charge two mobile devices or your Spark.

Updating Firmware

Can I use other apps while DJI GO 4 is updating?

No. If you do, the update will fail. You will then need to download the firmware and update again.

Why does DJI GO 4 remind me to reconnect to Spark’s Wi-Fi right before it restarts to complete the update?

Before the update is complete, Spark will need to restart. Once it does, reconnect your mobile device to Spark’s Wi-Fi. DJI GO 4 is just reminding you that you will need to do this for a successful update. 

Can I disconnect from the internet once the firmware is downloaded successfully?

Yes.

If the aircraft or the remote controller battery levels drop below 50% during an update, will the update fail? 

No, but it is recommended that both have a high level of battery charge during the update. 

What should I do if the aircraft and battery firmware versions are inconsistent?

Connect Spark to DJI GO 4, and the app will inform you of appropriate updates to ensure consistency.

What should I do if the update is really slow?

Please wait patiently and do not operate Spark or the remote controller during the update. Usually, it takes two minutes to update the remote controller and five minutes to update Spark. If the update process is taking much longer, please check your internet connection or move to a different environment. You could also restart Spark and the remote controller to begin the update again.

What factors could lead to an update failure?

a. Low battery level. Make sure the battery level is higher than 50%.
b. Powering off Spark or the remote controller during the update. If this happens, please restart Spark/remote controller and begin the update again.  
c. Internet disconnection when downloading firmware.  
d.Aircraft and remote controller firmware version inconsistency. Use DJI GO 4 to update the aircraft and remote controller to the latest version.  


 It is recommended that you use DJI Assistant 2 on your computer to update your aircraft.  

Please note that Spark will restart once the update finishes.

DJI Spark Tech Specs:


DJI SPARK

Takeoff Weight300 g
Dimensions143×143×55 mm
Diagonal Distance (propellers excluded)170 mm
Max Ascent Speed9.8 ft/s (3 m/s) in Sport Mode without wind
Max Descent Speed9.8 ft/s (3 m/s) in Auto Landing Mode
Max Speed31 mph (50 kph) in Sport Mode without wind
Max Service Ceiling Above Sea Level13,123 feet (4,000 m)
Max Flight Time16 minutes (no wind at a consistent 12.4 mph (20 kph))
Max Hovering Time15 minutes (no wind)
Operating Temperature Range32° to 104° F (0° to 40° C)
Satellite Positioning SystemsGPS/GLONASS
Hover Accuracy RangeVertical:
+/- 0.1 m (when Vision Positioning is active) or +/-0.5 m
Horizontal:
+/- 0.3 m (when Vision Positioning is active) or +/-1.5 m
Transmitter Power (EIRP)2.4 GHz
FCC: 25 dBm; CE: 18 dBm; SRRC: 18 dBm
5.8 GHz
FCC: 27 dBm; CE: 14 dBm; SRRC: 27 dBm
Operating Frequency2.400 - 2.483 GHz; 5.725 - 5.825 GHz

3D SENSING SYSTEM

Obstacle Sensing Range1-16 ft (0.2 - 5 m)
Operating EnvironmentDetects diffuse reflective surfaces (>20%) larger than 20x20 cm (walls, trees, people, etc.)

SPARK CAMERA

Sensor1/2.3" CMOS  
Effective pixels: 12 MP
LensFOV 81.9° 25 mm (35 mm format equivalent) f/2.6
(shooting range: 2 m to ∞)
ISO RangeVideo: 100-3200
Photo: 100-1600
Electronic Shutter Speed2-1/8000 s
Image Size3968×2976
Still Photography ModesSingle Shot
Burst Shooting: 3 frames
Auto Exposure Bracketing (AEB): 3 bracketed frames at 0.7 EV bias
Interval: 2/3/5/7/10/15/20/30/60 s
Video ResolutionFHD: 1920×1080 30p
Max Video Bitrate24 Mbps
Supported File SystemsFAT32
Photo FormatJPEG 
Video FormatMP4 (MPEG-4 AVC/H.264)

SPARK REMOTE CONTROLLER

Operating Frequency2.412-2.462 GHz; 5.745-5.825 GHz
Max Transmission Distance2.412 - 2.462 GHz (unobstructed, free of interference)
FCC: 1.2 mi (2 km); CE: 0.3 mi (500 m); SRRC: 0.3 mi (500 m)
5.745 - 5.825 GHz (unobstructed, free of interference)
FCC: 1.2 mi (2 km); CE: 0.18 mi (300 m); SRRC: 0.7 mi (1.2 km)
Operating Temperature Range32° to 104° F (0° to 40° C)
Battery2970 mAh
Transmitter Power (EIRP)2.4 GHz
FCC: ≤26 dBm; CE: ≤18 dBm; SRCC: ≤18 dBm
5.8 GHz
FCC: ≤28 dBm; CE: ≤14 dBm; SRCC: ≤26 dBm
Operating Current/Voltage950 mAh @3.7 V
Supported Mobile Device SizeThickness range: 6.5-8.5 mm
Max length: 160 mm

SPARK FLIGHT BATTERY

Capacity1480 mAh
Voltage11.4 V
Max Charging Voltage13.05 V
Battery TypeLiPo 3S
Energy16.87 Wh
Net WeightApprox. 0.2 lbs (95 g)
Charging Temperature Range41° to 104° F (5° to 40° C)

SPARK GIMBAL

Controllable RangePitch: -85° to 0° 
Stabilization2-axis mechanical (pitch, roll)

VISION SYSTEM

Velocity Range≤22.4 mph (36 kph) at 6.6 ft (2 m) above ground
Altitude Range0-26 ft (0 - 8 m)
Operating Range0-98 ft (0 - 30 m)
Operating EnvironmentDetects clearly patterned surfaces with adequate lighting (lux>15) and diffuse reflectivity (>20%)

WI-FI

Operating Frequency2.4 GHz/5.8 GHz
Max Transmission Distance100 m(Distance), 50 m(Height) (Unobstructed, free of interference)

CHARGER

Input100-240 V; 50/60 Hz; 0.5 A
Output5 V/3 A; 9 V/2 A; 12 V/1.5 A

RECOMMENDED MICRO SD CARDS

ModelSandisk 16/32 GB UHS-1 Micro SDHC
Kingston 16/32 GB UHS-1 Micro SDHC
Samsung 16/32 GB UHS-I Micro SDHC
Sandisk 64 GB UHS-1 Micro SDXC
Kingston 64 GB UHS-1 Micro SDXC
Samsung 64 GB UHS-I Micro SDXC



GIMBAL

Controllable RangePitch: -85° to 0° 
Stabilization2-axis mechanical (pitch, roll)

VISION SYSTEM

Velocity Range≤22.4 mph (36 kph) at 6.6 ft (2 m) above ground
Altitude Range0-26 ft (0 - 8 m)
Operating Range0-98 ft (0 - 30 m)
Operating EnvironmentDetects clearly patterned surfaces with adequate lighting (lux>15) and diffuse reflectivity (>20%)

WI-FI

Operating Frequency2.4 GHz/5.8 GHz
Max Transmission Distance100 m(Distance), 50 m(Height) (Unobstructed, free of interference)

CHARGER

Input100-240 V; 50/60 Hz; 0.5 A
Output5 V/3 A; 9 V/2 A; 12 V/1.5 A

RECOMMENDED MICRO SD CARDS

ModelSandisk 16/32 GB UHS-1 Micro SDHC
Kingston 16/32 GB UHS-1 Micro SDHC
Samsung 16/32 GB UHS-I Micro SDHC
Sandisk 64 GB UHS-1 Micro SDXC
Kingston 64 GB UHS-1 Micro SDXC
Samsung 64 GB UHS-I Micro SDXC

The item has been added to your basket

Continue Shopping
Proceed To Checkout