SpeedyBee Stack F7 V2 FC 45A 4in1 ESC

333 Reward Points
SKU:
Brand: SpeedyBee

Quantity

ADD TO WISHLIST
Found it cheaper? Click here

Sorry this item is out of stock, please complete in the form below to be notified when stock is available.

QuadCopters Price Match

Where you've seen it cheaper (UK Stores Only)

SpeedyBee Stack F7 V2 Flight Controller with wireless flasher



SpeedyBee Stack F7 V2 FC 45A 4in1 ESC_


SpeedyBee Stack F7 V2 FC 45A 4in1 ESC_

SpeedyBee Stack F7 V2 FC 45A 4in1 ESC_


SpeedyBee Stack F7 V2 FC 45A 4in1 ESC_


SpeedyBee Stack F7 V2 FC 45A 4in1 ESC_



SpeedyBee Stack F7 V2 FC 45A 4in1 ESC_


SpeedyBee Stack F7 V2 FC 45A 4in1 ESC_


SpeedyBee Stack F7 V2 FC 45A 4in1 ESC_


SpeedyBee Stack F7 V2 FC 45A 4in1 ESC_



SpeedyBee F7V2 Specifications

MCUSTM32F722
IMUMPU6000
USBType-C
BaroBMP280 (I2C)
OSDBetaFlight OSD w/ AT7456E chip
BLESupport, used for Flight Controller configuration
WiFiSupport, used for data transfer, e.g firmware
flashing, and Blackbox analysis.
DJI Air Unit slotA full DJI Air Unit JST slot onboard
BlackBox16MB onboard dataflash
Current Sensor1 : 10 (Scale 168)
BetaFlight Camera Control PadYes
Power input3S - 6S Lipo
5V power output7 * 5V output, 6 pads and a BZ+ pad used for Buzzer, the maximum load current is 2.5A. 9V * 1,
the maximum load current is 2.5A.
9V power output2 * 9V output, 1 pads and another one used for DJI slot
4.5V power output1 * 4.5V output pad
3.3V power output1 * 3.3V output pad, the maximum load current is 500mA.
ESC signalM1 - M4
UARTFull UART * 5(UART1, UART2, UART3, UART5, UART6)
ESC Telemetry UARTUART4 RX
I2CUsed for external Magnetometer, Sonar, etc.
LED pinUsed for WS2812 LED
BuzzerBZ+ and BZ- pad used for 5V Buzzer
Boot buttonUsed to easy enter DFU mode
RSSI inputRSSI input solder pad
SmartPortUse any TX pad of UART for the SmartPort feature.
Support Flight Controller FirmwareBetaFlight(Default), EMUFlight
Target nameSPEEDYBEEF7V2
Mounting30.5 x 30.5mm,  4mm hole size
Dimension41 x 38 x 6.9mm
Weight9g

SpeedyBee BLHeli32 45A 4 in 1 ESC Specifications

FirmwareBLHeli32 SpeedyBee 4in1
MCUSTM32F051
Continuous Current45A * 4
Burst Current55A(10S)
ESC ProtocolDSHOT300/600/1200
Power input3S - 6S LiPo
Power outputVBAT
Current SensorSupport (Scale 168)
ESC TelemetrySupport
Mounting30.5 x 30.5mm, 4mm hole size
Dimension41 * 45 * 6.5mm
Weight12.5g
OK

The item has been added to your basket

Continue Shopping
Proceed To Checkout