The Riot Control Flight Control Board was designed by the Rotor Riot pilots around components that have proven performance.
By placing the gyro in a soft-mounted case and also soft-mounting the board itself, this FC provides very clean signal for easy tuning and smooth flying. The layout of the board is organized with builds and repairs in mind, keeping related wires grouped together to eliminate unnecessary board crossing. 3 UARTs are available for your receiver, VTX telemetry, and other peripherals. This board features inverter jumper pads on UART 1 so it can be used both for inverted SBUS protocols as well as non-inverted protocols such as DSMX or CRSF. 9V power is supplied for your camera and VTX to ensure noise-free video.
We are proud to bring you a board that will deliver simple wiring and smooth flight!
- Soft mounted gyro
- Soft mounted corner holes
- Intuitive solder layout
- 3 UARTs with a switchable inverter on UART 1 for SBUS
- Integrated BF OSD
- Breakout port for 4-in-1
- IMU: MPU6000 (Soft-Mounted)
- MCU: STM32F405
- Mounting Pattern: 30.5 x 30.5
Please test the board first using USB Power and report any problems if any immediately as returns cannot be accepted once the board as been soldered.