KISS 32bit Flight Controller V1.03
The Kiss 32 BIT Racing Drone FC As used by Pro's like Mr Steele. The KISS (Keep It Super Simple) FC is fast becoming the go to flight controller due to it being simple yet super effective. Pair it up with some 24amp KISS ESC's and you have a match made in heaven.
These are the latest version 1.03 that support Dshot protocol,
- changed bootloader solderpads to a press button
- changed USB Port type
Supported copter types:
- Quad +/x
- Hexa +/x
Supported RX types:
- PPM Sum
- Spektrum Sat. (serial / DSM2 & DSMX)
- Futaba / Taranis SBUS
- Jeti ExBus
- Graupner SumD / SumO
- classic RX with single channel output
Mounting Holes: 3x3cm pattern, with 3.2mm holes (widely compatible)
Driver for STM32F303CCT6
Normally you dont need to download any driver for the USB support.
Windows 7 8 and 10 care for this on their own after you connected the device.
The connection diagramm / Pinout you find in KISS-FC GUI.
RCGroups Thread: http://www.rcgroups.com/forums/showthread.php?t=2555204
Download the manual here: https://flyduino.net/ultraesc/downloads/Flyduino-KISS-FlightController-Manual-v1.06-en.pdf
Buy the Kiss Drone Racing Flight Controller from the the Largest and Most established Drone Store in the Uk Quadcopters.co.uk
Note : Please always test the board first using usb connection as returns cannot be accepted once the Flight Controller as been soldered.