Overlander RC-D100 AC/DC Dual Balance Charger 2x100W
Overlander RC-D100 AC/DC Dual Lipo Battery Charger 2 x 100w HV Capable.
Uk version of the SkyRC D100 branded by Overlander.
Lipo HV Charging Capable The newest addition to the Overlander charger range, the RC-D100, is adapted to a full range of chemistries (LiPo, LiFe, LiIon, NiMH, NiCd and PB) and comes with a comprehensive set of leads making it fully-prepared for practically any battery type. This charger is specially designed to cater for the higher end user, but with the aid of a simple-to-use interface and a complete set of instructions, this charger is by no means limited to experts.
This charger features:
Two independent charging circuits (dual 2x100W output on DC (or with power supply) and 100W can be distributed across 2 channels on AC)
Terminal voltage control
Re-Peak mode for NiMH/NiCD batteries
Battery internal resistance meter
This chargers comes with two XH balance boards, XT60 with crocodile clips, two XT60 charge leads, two deans charge leads, and an AC power cord with crocodile clips for DC.
The RC-D100 has been created with automated safety precautions, including a charging current limit, capacity limit, temperature threshold and processing time limit.
This charger is also compatible with both iOS and Android smart phones via a Wi-Fi Module (sold separately), making operation easier than ever.
|Input Voltage||AC 100-240V||DC 11-18V|
|Charge Circuit Power||Ac Input 100W (Support Power Distribution)||DC Input 2x100W|
|Discharge Circuit Power||2x10W|
|Charger Current Range||0.1-10A|
|Discharge Circuit Range||0.1-5A|
|Current Drain for Balancing Port||Max 200mA/cell|
|Trickle Charging Current||20mA-300mA & OFF|
|LiPo/LiFe/LiIon/LiHV Battery Cell Count||1-6S|
|NiMH/NiCd Battery Cell Count||1-15S|
|Pb Battery Voltage||2-20V|
|Dimensions||163 x 153 x 72mm|