Matek FCHUB-W for Fixed Wing

333 Reward Points
SKU:
Brand: Matek

Quantity

ADD TO WISHLIST
Found it cheaper? Click here

Sorry this item is out of stock, please complete in the form below to be notified when stock is available.

QuadCopters Price Match

Where you've seen it cheaper (UK Stores Only)

Matek FCHUB-W for Wings is a PDB with 4 Bec Outputs offering different voltages to suit Wings and Planes.
Perfect for Fixed Wing and FPV Planes as the Matek FCHUB-W has 4 outputs Bec at 3.3V-5V-10V and 1 adjustable 5-7v. It is designed to work with the F405 std and F722 flight controllers in the Matek Range.
Matek FCHUB-W for wings flight controllerMatek FCHUB-W descriptionInav connection for the Matek fchub-wing 

PDB

  • Input voltage range: 9~30V (3~6S LiPo) w/TVS protection
  • 2x ESC power pads
  • Current Senor: 104A,  3.3V ADC,  Scale 317
  • 4x BEC on board
  • 3x LED indicators for 5V, 10V & Vx

Soldering Holes & Pads

  • + & – : Bettery & ESC power pads
  • Curr: Current sensor output
  • Vbat: Bettery voltage
  • G: Ground
  • 3V3: LDO 3.3V
  • 5V: BEC 5V
  • 10V: BEC 10V
  • Vx: BEC 5V/6V/7.2V ADJ

FFC connection

  • Compatible with MATEKSYS FC F405-STD, F722-STD, F405-OSD
  • MT1: Motor1 of INAV Flying Wing & Airplane
  • MT2: Motor2 of INAV Flying Wing & Airplane
  • SV3~SV6: Servo 3~6 of INAV Flying Wing & Airplane
  • VTX: Video Transmitter signal
  • TX5 & RX5: UART5 of F405-STD/F722-STD/F405-OSD

BEC 5V output

  • Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, GPS module
  • DC/DC synchronous buck regulator
  • Voltage: 5.0 +/- 0.1VDC
  • Continuous current: 2 Amps, Max.3A
  • Output Ripple: 20mV (VIn=24V, VOut=5V@2A load)
  • Short-circuit tolerant (2 seconds)

BEC 10V output

  • Designed for Video Transmitter, Gimble
  • DC/DC synchronous buck regulator
  • Voltage: 10.0 +/- 0.2VDC (Input voltage >11V)
  • Continuous current: 2 Amps, Max.3A
  • Output Ripple: 20mV (VIn=24V, VOut=10V@2A load)
  • Short-circuit tolerant (2 seconds)

BEC Vx output

  • Designed for Servos
  • DC/DC synchronous buck regulator
  • Voltage adjustable, 5V Default, 6V or 7.2V via jumper
  • Continuous current: 5 Amps, Max.5.5A
  • Output Ripple: 50mV (VIn=24V, VOut=5V@5A load)
  • Short-circuit tolerant (2 seconds)

BEC 3.3V output

  • Designed for Baro / Compass module and Spektrum RX
  • Linear Regulator
  • Continuous current: 500mA

Physical

  • Mounting: 30.5 x 30.5mm, Φ3mm
  • Dimensions: 52 x 36 x 6 mm
  • Weight: 13g

Write your own review

 

OK

The item has been added to your basket

Continue Shopping
Proceed To Checkout