FlightOne Bolt32 V2 4in1 Esc Four ESCs Built Into One for a compact neat build.
Please select Blot32 or Bolt32 both the same just different colours and one is branded by the pilot Skitzo.
Features of the Bolt 32 / Blot32
4 current sensors
BlHeli32 and More
Connector for Revolt and Revolt OSD
50A Per Channel
Stable and smooth power delivery
The Flightone Bolt32 4in1 electronic speed controller (ESC) was designed for power and performance. Coupled with the Revolt or RevoltOSD FCs, the Bolt32 makes a thin stack while keeping the escs save inside the frame, protected from prop strikes. The escs are also safe from vibrations thanks to the integrated RaceFlight Gummies. These are the latest v2 boards with improved capacitors and foil insulation.
The Flightone Bolt32 V2 4in1 is also extremely easy to install. It is compatible with 4s through 6s batteries and has a built-in current sensor that hooks up directly to the Revolt or RevoltOSD to provide amp draw and mAh consumed information. The Bolt32 can pin into the revolt and provides the Revolt power.
- 30.5mm x 30.5mm mounting hole spacing
- Integrated RaceFlight Gummies
- 50 amp per channel
- BlHeli32 and more to come!
- 5V voltage regulator capable of 3A continuous output
- D-Shot ready
- 4s – 6s compatible
- Built in Current Sensors
- Special low noise connector integrated with the Revolt and Bolt pair
- Current and Voltage sent to flight controller
- Easy Install
- High-quality components
- Weight: 15.5 grams