SkyRC Quattro 1S Lipo Charger for Tiny Whoops and Inductrix

IN-STOCK
333 Reward Points
SKU:
Brand: SkyRc

Quantity

ADD TO WISHLIST

Sorry this item is out of stock, to put it on back order please place it in your basket and complete the purchase. Alternatively, fill in the form below to be notified when stock is available.

SkyRC Quattro 4x1S Micro Single Cell LiPo Battery AC/DC Charger perfect charger for Tiny Whoops and Blade Inductrix

This dual powered AC/DC battery charger has been designed specifically for all micro model enthusiasts wanting to charge up to four single-cell (3.7V) LiPo batteries at the same time.

It has four independent 4W charge ports, each with the four most common battery connectors to cover all your needs. Each charge port has an adjustable charge current from 100mA to 1A. The individual LED displays show current, capacity and charge status.

Each charge socket is independently controlled so you can remove and replace batteries in the charger without affecting the charge of the others to keep flying time to a maximum.

Input power can be provided by either mains AC (100-240V) using the provided lead, or a wide range of DC power sources.  Any conventional DC power source or battery within the 11V to 15V range may be used to power the charger.

The charge ports are able to accept the following batteries:

MX port - Single cell batteries fitted with a 4mm, 2-pin Molex connector with 1mm pin-spacing as used in Eflite Ultra Micro, Blade mCX, Parkzone, Nine Eagles and Kyosho Minium series models.

mCPX port - Single cell batteries fitted with a 5mm, 2-pin Molex connector with 2mm pin-spacing as used in some E-flite UMX series models including the mCP X ultra-micro helicopter.

Micro port - Single cell batteries fitted with a 6.5mm, 2-pin Molex connector with 2mm pin-spacing as used in the Hubsan X4 and X4C and Ares Ethos QX 75 Quadcopters.

Micro Reverse port - Single cell batteries fitted with a 6.5mm, 2-pin Molex connector with 2mm pin-spacing with reverse polarity.

Features

  • AC/DC powered
  • Four independent charge ports each with an adjustable charge current: 0.1~1A
  • Each port has four popular battery connectors and an independent LED display
  • Audible alarm indicating process termination
  • Comprehensive safety features including short circuit, over current, battery reverse polarity and DC input voltage protection

Specification:
Cell Count - Single cell (3.7V) LiPo (x4)
Mains AC Input Voltage - 100-240V
DC Input Voltage - 11-15V
Maximum Charge Power - 4W ±10% (x4)
Charge Current Range - 0.1-1A ±10% (adjustable)
Battery Connector Type - Micro, Micro Reverse, MX, mCPX
Working Temperature - 0~50C
Weight - 280g / 10oz
Dimensions - 132 x 100 x 50mm

In the Box
Sky RC Quattro Micro Charger
Mains AC input lead fitted with a UK plug

BRAND: SkyRc
MPN: SKYRC-QUATTRO

Write your own review

The item has been added to your basket

Continue Shopping
Proceed To Checkout