ZOHD Nano Talon PNP with Gyro 860mm

IN-STOCK
333 Reward Points
SKU:
Brand: Zohd Sonic Modell

Quantity

ADD TO WISHLIST

Sorry this item is out of stock, please complete in the form below to be notified when stock is available.

ZOHD Nano Talon PNP RC Airplane with Gyro made with Strong EPP Crash resistant foam.
Measuring 860mm and coming complete with Motor, Esc, Servos and stabilising gyro this is one of the easiest planes to get into FPV and with the right battery long flight times can easily be achieved.

This 860mm Wingspan Nano Talon is a portable edition of the Talon Airframe series. It is super easy to hand-launch and fly because of the gyro, This Nano Talon is very convenient to carry with because the detachable mainwing and tail wing can be detached easily by plugs and magnets. The built-in servo structure makes the airfoil more aerodynamic, and avoid damage even in a crash. The inside room and extra bottom hatch are also huge for more FPV gear. 

Description:

Brand Name: ZOHD

Item Name: Nano Talon

Wingspan: 860mm/33.85in

Length: 570mm/22.44in

Rudder: Yes (V-tail)

Flap: No

Aileron: Yes

Flying Weight: 361g(w/o FPV gear)

Material: Crash Resistable EPP
Weight: 700g

CG: 3.5cm from the wing leading edge(mark under the wing) 

Color: White + Black

Motor: ZOHD 2204 1870KV BL

Motor Shaft Diameter: 5mm

ESC: 30A W/1A BEC(XT60 connector)

Servos: 3pcs 8g digital servo

Propeller: 6x3 Inch

Recommended Battery: 3S 1300-1800mAh XT60 connector Click here
Recommend Radio: ≥6CH Click here

Flying speed: 12 to 90km/h

 
Features:

* Built-in Gyro make the Nano Talon fly super stable, and easy to control.

* EPP molded wing, pre-built-in Carbon Fiber spar for enhancement, light and flexible plus crash resistence.

* Detachable mainwing and tailwing for easy transport, and easy to change wing by simple plug.

* Mainwing connected to fuselage by buckle, will be disconnect and release during crash.

* “NACA”air-intake in nose and air-outlet in tail for better cooling on FPV gear.

* Extra rooms in canopy and cabin for FPV gear, bottom hatch provide bonus rooms for more FPV equipment

* Self tighten prop nuts for secure prop mounting

Included

Zohd Nano Talon Pre Assembled
Motor (Installed)
Servos (installed)
Esc (installed)
Gyro with built in stabilisation (installed)
6x3 Prop with self tightening nut

Write your own review

 

The item has been added to your basket

Continue Shopping
Proceed To Checkout