BetaFPV Beta65X 2s Whoop Quadcopter BNF

IN-STOCK
333 Reward Points
SKU:
Brand: BetaFPV

Flash to International Firmware (£15.00)
Quantity

ADD TO WISHLIST

Sorry this item is out of stock, please complete in the form below to be notified when stock is available.

Beta65X Whoop Quadcopter BNF FrSKY EU Version with 2s Power in a tiny size. Small and Quiet and able to fly anywhere.

This is a new era for Whoop drones. 2S Whoop drone has the power to fly real acro, like a larger quad, but is still small enough, safe enough, and quiet enough to fly anywhere. Beta75X and Beta65X. X is for "eXtreme".

Highlights of the Beta65X

  • Beta65X start a new era of 2S whoop drones. With a big improvement in power, you could fly real acro, like a larger quad, but is still small enough, safe enough, and quiet enough to fly anywhere.
  • With the high performance STM32F405 processor FC boards and tuned Betaflight Ominibus 3.5.0 firmware, everyone could fly the Beta75X drone like a racing professor.
  • Durable and light enough frame is customed for the Beta65X. A total weight of 26g give pilots a good balance of weight and nice punch on 2S battery.
  • Whole drone no soldering or tinkering necessary. Customed lightest 0802 17500KV motors with cable connectors. Just plug and play.
  • 2pcs 1S 300mAh Lipo HV batteries are recommended in default. So pilot could also use their whoop batteries.
  • We also stock the XT30 Power cables if you want to run a 2s lipo pack.

  • SPECIFICATION

    • Weight: 26g (without battery)
    • Motors: 0802 17500KV with connector
    • Props: 31mm 4-blades props, 1.0mm shaft hole
    • Camera tilt angle: 35 degree
    • Receiver Option: Frsky XM 
    • Batteries: 300mAh 1S Lipo HV batteries
  • Flight Controller

    • CPU: STM32F405
    • Six-Axis: MPU6000
    • Size: 26mm x 26mm, whoop mounting pattern
    • Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
    • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
    • Smart Audio port is available for radio control VTX
  • ESC SPECIFICATIONS

    Find more details about this 2S ESC 

    • Support BLheli/BLHELI_S suite Pass-through ready
    • Dshot600 in default
    • Input voltage: 2S lipo
    • Cotinue current: 6A
    • Peak current: 10A 
    • Firmware: BLHELI_S
    • Processor: SILABS EFM8BB21F16G
  • Z02 AIO Camera VTX

    Find more details about this AIO Z02 camera VTX  On the Beta75X, it is the customed version with VTX board and camera board split.

    • Output power: 0mW, 25mW and 200mW (Adjustable)
    • Smart Audio function is included for radio control
    • Antenna: Dipole ANT
    • Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
    • TV System: NTSC
    • Field of view: 100-120 degrees with 1/4 lens
  • PROPS OUT

    The Beta65X drone also comes with "props out" in default. Why we need "props out" direction?

    Default Betaflight props direction, quadcopter dips and "washes out" in hard corners. With reversed props or "props out", no more dipping even in hardest cornering.
    props out beta65x whoop quadcopter

    POWER CABLE

    There is only one choices for the Beta65X battery -- PH 2.0 option for you. The two 260mAh Lipo HV 1S batteries can be inserted into the slot in design, as seen below. There are options to fit a xt30 cable and run a 2s 300mah pack but they are a little heavy from what we have found and this is the best set up.
    Betafpv 65X Power cable

    Package Includes.

    • 1 * Beta65X BNF 2S Whoop Quadcopter
    • 1 * Spare 31mm 4-blades props (2CW+2CCW)
    • 1 * Spare Canopy
      2 x 300mah 1S HV Lipos

      PLEASE NOTE NO CHARGER IS SUPPLIED WITH THE PACKAGE AND THE RECEIVER IS EU LBT SO MAY NEED FLASHING DEPENDING ON YOUR RADIO.
      Recommended charger HERE

Write your own review

 

The item has been added to your basket

Continue Shopping
Proceed To Checkout