Matek F722-STD Flight Controller with OSD

IN-STOCK
333 Reward Points
SKU:
Brand: Matek

Quantity

ADD TO WISHLIST

Sorry this item is out of stock, to put it on back order please place it in your basket and complete the purchase. Alternatively, fill in the form below to be notified when stock is available.

The latest flight controller from Matek is the F722 STD with built in betaflight OSD and Black Box and Barometer. This will be a popular choice for Drone Racing pilots and Matek is already one of the leading brands . When flashing please use the Matek F722 Target. 

Matek Flight controller F722
matek F722-STD FC layout and instructions
the matek flight controller includes soft mountshow to connect the flight controller to pdbMatek F722 FC Contents

  • MCU: 216MHz STM32F722RET6
  • IMU: 32K ICM20602 gyro/accelerometer (SPI)
  • Baro: BMP280 (I2C)
  • OSD: BetaFlight OSD w/ AT7456E chip
  • Blackbox: MicroSD card slot (SD/SDHC)
  • VCP, UART1, UART2, UART3, UART4, UART5
  • PPM/UART Shared: UART2-RX
  • Battery Voltage Sensor: 1:10
  • Current Sensor: No (FCHUB-6S, FCHUB-VTX option)
  • BEC 5V: No (FCHUB-6S, FCHUB-VTX option)
  • LDO 3.3V: Max.300mA
  • I2C1 SDA & SCL: Yes
  • Camera control: Yes
  • DAC: Yes
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • 7x PWM / DShot outputs without conflict
  • 5x UARTs
  • 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
  • 1x I2C1
  • 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
  • 1x Side-press button for BOOT(DFU) mode
  • 1x 16pin bottom mounted FFC Slot for FCHUB-6S or FCHUB-VTX connection
  • 36x36mm PCB with 30.5mm mounting holes
  • w/ 2x 0.5mm*16Pin 5cm Flexible Flat Cable
  • w/ 4pcs M3 Anti-vibration Standoffs

Write your own review

The item has been added to your basket

Continue Shopping
Proceed To Checkout