iFlight Chimera 4 HD Long Range BNF with Caddx Nebula 3000kv

IN-STOCK
333 Reward Points
SKU:
Brand: iFlight

Quantity

ADD TO WISHLIST
Found it cheaper? Click here

Sorry this item is out of stock, please complete in the form below to be notified when stock is available.

QuadCopters Price Match

Where you've seen it cheaper (UK Stores Only)

Iflight Chimera4 HD Long Range Cruiser BNF Freestyle Drone with Caddx Vista Nebula Nano HD FPV Camera and Air Unit and super long range 3000kv cruiser version motors for maximum efficiency. 
Astonishing flight times are achievable with only a 850mah 4s lipo.
Please Note Motor colours may vary from the pictures. 

Introducing our first ultra-light LongRange 4inch BNF for every terrain. Newest iFlight SucceX hardware onboard coupled with our XING 1404 motors in different KV classes. Slow cruising or speedy action, there's something for every taste. Get flight times above 15min using at least 4S 850mAh packs. Go crazy and strap a Li-On 4S pack on and go even further, depending on capacity and weight!

GPS Rescue ready for easy recovery in case of signal loss, or even if you've been surfing those mountains and suddenly can't find the way back home.. Betaflight OSD pre-setup GPS elements will show you the way!

CaddX Vista with the lighter and smaller CaddX Nebula.

Outstanding digital FPV experience in 720p directly on your goggles. Custom iFlight 150mm LR antenna for best signal coverage even at long distance.
chimera4 hd spec1chimera4-spec2.jpgchimera4-spec3.jpgchimera4-spec4.jpgchimera4-spec5.jpg

Pre Tuned and Setup

  • Pre tuned by Iflight, a general PID- and Filter tuning was applied for a great flight experience!
  • To restore lost tunes or updates, please check out Iflight CLI FIrmware settings here
  • Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
  • GPS Rescue is OFF by default to prevent from unwanted or unexpected drone behaviour as this is still an experimental feature.  Please see our article on how to enable GPS rescue mode

Specifications

Frame: Chimera4

  • Wheelbase: 178mm
  • Main body dimension: 136.8*114.8mm
  • Bottom to top distance: 28mm
  • Arm thickness: 4mm
  • Bottom plate thickness: 4mm
  • Top plate thickness: 2mm
  • TPU Camera plate thickness: 2mm
  • FC: 25.5*25.5mm/20*20mm/16*16mm
  • FPV Cam: 19mm Micro / 20mm

Succex-E Mini F4 Stack

SucceX-E mini F4

  • – MCU: 168MHz STM32F405
  • – Gyro: MPU6000
  • – Blackbox: 8MB
  • – Betaflight OSD: YES
  • – BEC: 5V 2.5A
  • – Uarts: 5
  • – ESC Telemetry: yes
  • – INA Pad: nuart2
  • – Input voltage: 2-6S
  • – Size: 25*25mm /20*20mm φ3 mounting
  • – Weight: 4g
  • – Firmware: BETAFLIGHTF4
  • Physical
  • – Mounting hole: 20*20mm,φ3mm
  • – Size: 25*25mm
  • NOTE: F.PORT protocol RX input support, telemetry not supported.

ESC // SucceX-E Mini 35A

  • MCU: BB21 F16G
  • BLHeliS
  • Capacitance: 470uF/50V
  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Constant: 35A / Burst: 40A
  • BEC: No
  • Supports up to Dshot600, Proshot, Oneshot, Multishot
  • Target: G-H-30
  • BLHeliSuite download: http://www.mediafire.com/file/1tn449x6815upat/BLHeliSuite16714901.zip/file
  • Weight: 6.9g
  • Mounting pattern: 20*20, φ3mm with Grommets φ2mm
  • Dimensions: 31*30mm (including the power pads)

Includes

Pre-built and indoor tested Quadcopter

  • 1x Chimera4 frame
  • 1x Caddx Vista Digital HD System Kit with Nebula Camera
  • 2x Albatross LHCP ipex 160mm antenna
  • 2setsx Nazgul 4030 props (Set of 2 – Color may vary)
  • 2x 15*150mm Microfiber PU Leather Battery Strap (Color May Vary)

Suggested Extra Parts

Write your own review

 

OK

The item has been added to your basket

Continue Shopping
Proceed To Checkout