Jumper R1 - D16 Frsky Compatible Micro Receiver with S.Port and S.bus

The Jumper R1 D16 receiver is compatible with all devices using the Frsky D16 mode (FCC NON-EU), with integrated redundancy, telemetry and smart port enable, and the IPEX connector makes it easier to replace the antenna. Ideal for mini drones or models requiring an S.bus or S.port connection. 

Works great with the Jumper T16 Radio and the T18 Radio and also will bind to Frsky radios using the D16 Protocol (FCC NON-EU).
Brand name: Jumper

Item name: R1 Receiver

Channels: 16ch (SBUS)

RSSI (Signal Strength Indication) output: 0-3.3v

Data return: S.port

Operating voltage range: 4.0~6V

Operating current range: 80mA@5V

Effective distance: full distance (>1.5km)

Size: 20*15*4mm (without antenna)

Weight: <2g

Compatibility: D16 mode FrSky Taranis D16 Mode (International NON-EU)

How to bind:

Press and hold the receiver's bind button, turn on the power, the receiver will now enter binding mode. The red light is always on and the green light is flashing slowly.

Turn on the remote control and begin the bind procedure according to your radio. After the bind is successful the red light is off and the green light is always on.

Note: When the receiver loses the signal, the green light is off and the red light is flashing slowly.

Package included:

1 x Jumper R1 Receiver